250kg / h Four Cavity plastic pipe extrusion machine for electrician threading pipe

1. Introduction of Product

16-50mm Four Cavity PVC Pipe Extrusion Production Line

4 cavity PVC electrical tube, water supply pipe extrusion line can extrude four pipes at same time on one machine. This line can save invesrment cost in factory building and production, which increase the capacity a lot and reduce production time. SJSZ65 conical twin-screw extruder can easily reach 5.5-6.5ton/per day, the production speed take 16mm as example can get more than 8-10m/min.

The whole line is composed of conical twin screw extruder Ø65mm, 4 cavity mould, 4 cavity cooling calibration tank, 4 station haul-off, 4 station cutter, and 4 station tipping table.

2. Quick Detail:

Raw material+additive→mixing→conveying feeding→force feeding→conical double screw extruder→one module four pipe mould→calibrator→four spray vacuum calibration tank→ink printer→four belt haul-off→four uplift cutter→four pipe rack→finished product inspecting & packing

3. Description:

1. Suitable diameter: Ø16- Ø50mm;
2. Four station haul-off: up-down two caterpillar tracking;
3. Drawing speed:1-10m/min;
4. Drawing forth: 6000N

4. Applications:

Mainly applying in water-supply pipe, drainage pipe, electrical threading pipe and other area.

5. Specifications:

6. Competitive Advantage:

This extrusion line, equipped with high-efficient& energy-saving twin conical screw extruder, produces PVC pipes four outlet at once by specially designed die mould. Which means high-efficient energy-saving, increasing extrusion speed, economical occupied saving, and low human cost. The non-scrap cutting unit controlled by inverter independently, arrange able cutting speed, compacted by half to ensure long service life and flat and smooth cutting surface without dust trouble. Special designed automatic controlled system with good features of easy operation, the whole line linkage, failure alarms, high-efficient control, and stable extrusion.

7. Service:

1. Oversea installation guide.

2. Oversea test running

3. Ovsersea worker training

4. Technical support

5. Spare parts supply

6. Technical operation support

7. Formula and processing support

8. Option

4 cavity PVC electrical tube(16-50mm0, water supply pipe extrusion line can extrude four pipes at same time on one machine. This line can save investment cost in factory building and production, which increase the capacity a lot and reduce production time. SJSZ65 conical twin-screw extruder can easily reach 5.5-6.5 ton per day, the production speed take 16mm as example can get more than 8-10m/min.

Take whole line is composed of conical twin screw extruder Ø65mm, 4 cavity die head, 4 cavity cooling calibration tank, 4 station haul-off, 4 station cutter, and 4 station tinpping table.

9. Commercial Terms

1. Payment: 30% by T/T as advance payment, balance(70%) by T/T before shipment

2. Lead Time: 60 days after receiving the advance payment

3. Transportation: container, simple package ( PE film, salver)

4.Warranty period: From the day of the use of the machine in the buyer’s factory:

   (1) The mechanical Parts: 12 months

   (2) The electrical Parts: 6 months

5. Installatio
250kg / h Four Cavity plastic pipe extrusion machine for electrician threading pipe